You have no items in your shopping cart.
The LED Cable System Window Displays are a great way to illuminate your shopfront all year round. Ideally used in Estate Agents & Car Sales these cable kits clearly display & professionalise your images and information for potential customers to browse through.The LED Cable System Window Displays work from a power supply & have built in LED lights that disburse a glow across your graphic.It’s double sided bevelled edges also means that light can reflect adding that little extra glow to your display. Each illuminated panel comes with a silver anodised magnetic strip that holds each poster in place & frames the unit perfectly.
The kits can also be displayed both in a Portrait & Landscape orientation by switching the panels to your preference. The graphics themselves can be easily changed by slightly pulling open the silver magnetic frame that is associated with each panel. Included in each LED Cable System Window Display is two 4m Ceiling to floor cable kits, acrylic panels (1/3/4off depending on the purchased kit), with 4 clamps associated with each panel. An anodised aluminium fixing with one low voltage transformer is also included.
Installing the Kits are easy!
1.The first step is always to mark out the point of your cable system on both the floor & ceiling, ideally a plumb bob is a good tool to use here.
2.Once you have your positioning arranged, unscrew the fixing plate from the ceiling fixing & securely fix to your mark. (Always fix your ceiling marking first) and the repeat with the floor fixing.
3.On the floor fixing, undo the brass insert attached to the cable inside the tensioner and thread through the required amount of cable unit the cable is tight. Re tighten this insert & cut off the excess cable.
4.Screw the outer body of the tensioner onto the floor fixing.
5.Repeat Step 1-4 & you should now have both Cable Systems constructed.
6.The next step is connecting each light panel to the system. The light panel comes complete with cable connections. Before you fit the light panel make sure it is the correct way up, the pocket should open from the top. Once you have decided on where the light panel is to be fitted, remove the Allen screw from the connection on the light panel and attach to the cable. When you are happy the light is level, tighten the screw.
7.Once the light panels are all arranged & secured to your cable system the final part of installation is connecting the transformer. It is important to check that you have the correct transformer that was supplied with the kit. The Light Panels require a DC Transformer. Identifying the input & output. The output leads are 2 separate leads. These have to be connected to the cables using the supports provided.
NB: Never connect the transformer to the top or bottom fitting Turn the power off before making the connection