You have no items in your shopping cart.
Our Standoff fixing's enable you to create displays that really stand out! Available in a Satin Silver or Chrome Plated finish, you can choose the right design for your requirements. Commonly used with glass & acrylic displays, these fixing's help to create a professional and sleek look to any set of graphics or artwork.
Regularly spotted in Hotels & Office Blocks these small but effective fixtures also come in a range of sizes.
- S01 @ 13mm Diameter x 13mm Standoff
- S02 @ 13mm Diameter x 19mm Standoff
- S06 @ 19mm Diameter x 25mm Standoff
- S07 @ 25mm Diameter x 25mm Standoff
As well as providing an elegant finish to your display, the fixing's themselves are also simple to install.
Below is a step by step breakdown on how each fixing should be mounted.
- Using the mounting holes on your display as a template align & pencil mark the location of the fixing on the wall.
- Pre-Drill into the Surface and insert Nylon Anchors into the pilot hole and tap them Flush.
- Tighten Barrels to Surface
- Screw threaded the studs into your barrels, then place your panel in position and thread on the Male Caps until Snug.
- Repeat this process for all fixing's & your display should now be securely mounted.
* When mounting make sure to avoid all wiring & other electrical sources that might be hidden *
Regularly spotted in Hotels & Office Blocks these small but effective fixtures also come in a range of sizes.
- S01 @ 13mm Diameter x 13mm Standoff
- S02 @ 13mm Diameter x 19mm Standoff
- S06 @ 19mm Diameter x 25mm Standoff
- S07 @ 25mm Diameter x 25mm Standoff
As well as providing an elegant finish to your display, the fixing's themselves are also simple to install.
Below is a step by step breakdown on how each fixing should be mounted.
- Using the mounting holes on your display as a template align & pencil mark the location of the fixing on the wall.
- Pre-Drill into the Surface and insert Nylon Anchors into the pilot hole and tap them Flush.
- Tighten Barrels to Surface
- Screw threaded the studs into your barrels, then place your panel in position and thread on the Male Caps until Snug.
- Repeat this process for all fixing's & your display should now be securely mounted.
* When mounting make sure to avoid all wiring & other electrical sources that might be hidden *